欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
BRB0.3 Plate heat exchanger

BRB0.3 Technical parameters:

Model

BRB0.3

欧冠热门Active Area Per Plate

0.3m2

欧冠热门Nominal plate gap 

3.6mm

Thickness

0.6mm

Port dim 

90mm/120mm

Max flow rate 

150m3/h

Connection diameter 

欧冠热门DN80/ DN125

欧冠热门Working pressure

0.6MPa, 1.0MPa, 1.6MPa

 

BRB0.3 Device dimension:

 

Model
type 

Heat transfer area (m2) 

Number of plates

L

E

Weight(Kg)

BRB0.3--A

12

40

196

1200

500

BRB0.3—C

40

133

653

1800

75


◆A is the minimum assembly area, C is max assembly area.
◆Compact size L(mm): L=(4.4±0.2) x  Number of plates
◆Reserve the right to revise the data, the above data are for reference only, the specific in kind prevail

Brief
      Plate heat exchanger is made up of frame, heat transfer Plate group and clamping bolt and other major parts.

欧冠热门     Framework includes a fixed pressure plate and a pressure plate, on the guide rod and the guide rod bearing, a pillar at the other '. Compressed into corrugated plate hanging on the guide bar in between the two panels, mobile activity compaction pressure plate to plate group, with a set of clamping screw will be fixed pressure plate and the activity of compacting powder compact to a certain size. Two kinds of medium by the fixed (or activities) on the pressure plate Flange hole into composed of corrugated plate of each word, heat transfer medium by fixed (or activities) again after compression plate Flange hole. Activities with fixed pressure plate, pressure plate, pillars and guide bar are low carbon steel. Considering the various requirements of the users, framework design has many kinds of type type, double support frame type main and common floor, etc., can also according to the requirements of the user changes the framework model.

     Heat transfer Plate is a Plate heat exchanger is one of the core parts. Corrugated plate through a pressure molding, design reasonable ripple increases the effective heat transfer area of plate and make the flow ripple through the turbulence formation, to strengthen the heat transfer process. Assembly ripple and ripple cross into a lot of contact resistance points, greatly improving the plate stiffness, so can bear high pressure. Every board piece as a heat transfer surface, under the action of the seal, both sides of the plate respectively by cold and hot medium, heat transfer. Plate with four away L of liquid distribution, away L and plate around with sealing gasket, restrict the flow of medium in the plate group, the plate form parallel channels, through the two kinds of medium, make the best effect of heat transfer in the direction of the flow, in order to adapt to a variety of strong corrosion medium, corrugated plate materials are: pure titanium TAl, used in seawater or other corrosive medium; A variety of Stainless steel, with j = fresh water, drinking water, oil and other corrosive medium.

     On corrugated plate seal groove is equipped with sealing gasket, sealing gasket design into double sealing structure, and a signal. When the medium such as from the first line of the seal leak, away from the signal emission equipment, L can be found that the problem be solved as early as possible, will not result in a mixture of two kinds of medium. Sealing gasket can be selected according to different fluid and operating temperature of different analysing.

Plate material:
     * Stainless steel SUS304 SUS316L
       Clean water, river water, food, oil, mineral oil
     * Titanium and Palladium
       Marine Water, salt water, saline content
     * Hadtelloy Alloy
       Concentrated sulfuric acid, hydrochloric acid, phosphoric acid
     * Nickel
       High temperature and high concentration of caustic soda

Gasket material:
     * NBR
       Water, sea water, mineral oil, brine    一15--1IO~C
     *BNBR    -
       Mineral oil at high temperature, high temperature water    15--140~C
     * EPDM
       Hot water, steam, acid, alkali    一25--150~C
     *  Viton/Fluorine Rubber
       Strong acid, strong alkali, mineral oil, grease and oil, etc    一5--180~C
     *NEOPRENE
       Acid, alkali and mineral oil, low molecular weight fatty hydrocarbon   一35--130~C
     * Silicon Rubber
       High temperature, and some corrosive medium    一65-200℃

Design concept:
     *Plate of booster with a new type of diversion area design is a bigger place in plate diversion area velocity using multiplexer channel to increase pressure, to make the velocity equal to the entire plate, greatly improving the plate in the thermal efficiency, reduced the dead Angle, improve the plate scale.
     *Hanging plate high-strength mouth increase pattern design is designed to hang in the mouth, strengthen the rigidity around the flanging, assembled more neat and beautiful, open the better performance.
     *Plate of middle plate groove design of the inside of the foot board piece continuous corrugated disconnect, coexist of plates I} l added half slot structure, ease of plates on the pressure, make the plate more after press forming, whole, little flexible.
     *Plate of interlock design is on board the corners of suppressing special mechanical interlocking structure, to improve the plate assembly easy to string a leak phenomenon, in the process of the plate together more convenient, beautiful.
欧冠热门      *Plate of sealing gaskets are all made from paste buckles form, reduce the operation maintenance cost, easy maintenance.

Technical advantages and characteristic:
     *High coefficient of heat transfer, heat transfer Plate on the circles of special design, can make the fluid flow in low flow velocity under the intense turbulence, turbulence since the net effect and can prevent dirt, make the Plate heat exchanger heat transfer coefficient of tube and shell heat exchanger 3-5 times.
     *Economical: under the premise of the same heat, comparison of shell and tube: less investment, low operating cost, maintenance cost is low.
     *Adjustable: need to increase and decrease plate can meet the needs of process changes.
     *Compact structure, on the premise of the same heat, take up the space is only half of the tube shell type l / 3
     *Wash the maintenance is easy to clean

Design and type-selection:
     (1)Cold and hot medium physical parameters, such as ph, chlorine content, viscosity, density, thermal conductivity, specific heat and so on.
     (2)The import and export of cold and hot medium temperature.
     (3)Cold and hot medium flow or one of the traffic.
     (4)Cold and hot medium pressure loss.
     (5) Plate heat exchanger inherent features, such as Plate material, sealing rubber gasket materials.

 

欧冠热门Address: Xianjin Industrial Park, Louzhuang Town, Jiangyan District, Taizhou City, Jiangsu Province, China   

Tel: 0523-88698649  13921729986

欧冠热门Fax: 0523-88693182     

URL: maoyi24.com

 
宏颖客服
 
 
 
 
河北快3 500彩票 广西11选5 云南11选5 辰龙游戏 足球彩票 360体育直播 龙电竞 极速体育 十五选五走势图