欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
Motor-purposed Air cooler

Motor-purposed Air cooler Brief
欧冠热门     Air cooler (air cooled heat exchanger) is the use of Air cooling thermal fluid heat exchanger. Fluid within the heat pipe heat transfer through the wall and be fin and tube Air, Air normally used by the supply fan. Air cooler can be used for cooling or condensing, in a wide range of application: oil refining, petrochemical overhead vapor condensate; reflux oil, bottoms cooling; cooling cycle gas turbine power plant and the exhaust gas condensate; cooling the reaction product of a variety of . Working pressure up to 69 MPa. However, power consumption, noise, and covers all large, the cooling effect is greatly affected by climate change.

Motor-purposed Air cooler structure
Air cooler box can be divided into single and double box two structures. Choose for a single use single-box, use two-box when both series, the same single box and double box structure, the difference between the upper roller and two rings on boxes dual box assembly groups, lower housing assembly under the care groups wheel and two rings; the same structure as lower case single box double box structure.

Motor-purposed Air cooler cooling system requirements

1, sent to the generator cooling Air temperature should not exceed 35 ℃;

2, cooler Air outlet temperature and the cooling water inlet temperature difference is not less than the minimum 4 ~ 5 ℃;

3, Air can not be cooled to below 20 ℃, wherein in order to avoid moisture condensation on the coil of the generator or cooler (called condensation) coil insulation damage.

Motor-purposed Air cooler ventilation
There are ventilation and the wind blowing in two ways

欧冠热门① blast formula: Air flow through the fan after the first inflow tube bundle.

欧冠热门② induced draft: Air flows into the fan after the first flow through the tube bundle. The former is more economical operating costs, resulting turbulence on heat transfer beneficial use more. The latter gas distribution, is conducive to precise control of temperature, noise small, is the direction of development. Hot fluid outlet temperature mainly by adjusting the air flow through the tube bundle to control, ie adjusting the inclination, fan speed and louver opening degree of the blade and the like. Winter - pour, easy to freeze fluid, the fluid can be taken to adjust the outlet temperature of hot air circulation or steam heating methods used.

欧冠热门Motor-purposed Air cooler Main Technical parameters and shape Size table



Address: Xianjin Industrial Park, Louzhuang Town, Jiangyan District, Taizhou City, Jiangsu Province, China   

Tel: 0523-88698649  13921729986

Fax: 0523-88693182     

欧冠热门URL: maoyi24.com

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5