欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
方形金属补偿器

Model:

Metal Compensator series

Temperature:

0℃

Material:

upon your demands

Pressure:

0Mpa

Details:

欧冠热门Square Corrugated Compensator (JX type), also known as Compensator, rectangular expansion joint, Corrugated expansion, axial, lateral and angular compensation function, especially suitable for power plant, steel plant, coking, cement and other industries of smoke, wind, dust removal, fan pipe. Rectangular Corrugated Compensator adopts wear-resisting guide plate and the internal thermal insulation technology, prevent flushing medium into the Corrugated tubes, have better Corrugated tube Compensator mild wear-resisting effect, make the rectangular Corrugated Compensator can use.

Square Corrugated Compensator (JX type) install and use requirements:

1, Compensator, before installation should check its Model, specification and pipeline configuration, must comply with the design requirements.

欧冠热门Compensator with inner Sleeve is increase the inner Sleeve should be paid attention to in the direction of the flow in the same direction with the media, hinge type Compensator hinge rotation plane should be consistent with the rotational plane displacement.

2, the need for "cold" tight Compensator, predeformation auxiliary components should be used in pipe installation is removed.

欧冠热门3, it is forbidden to use Corrugated Compensator deformation method to adjust the pipeline installation error, so as not to affect the normal function of the Compensator, reduce and increase the service life of piping, equipment, the load bearing components.

4, the installation process, do not allow the slag splash to the shell surface, do not allow the wave shell by other mechanical damage.

欧冠热门5, after the piping installation, should be removed as soon as possible Corrugated Compensator is used as the install transport yellow aided positioning components and fasteners, and switch to a specified position limit device according to design requirements, make the piping have ample compensation ability under the environmental conditions.

6, Compensator all active components shall be external components are stuck or limit the scope of its activity, should guarantee the active parts of normal movement.

7, when the water pressure test, coping with a Compensator pipe terminal time of the department of fixed frame for reinforcement, make line do not move or rotate. For gas medium Compensator and the connecting line, must pay attention to the water filling whether need to add temporary support. Hydrostatic test water cleaning fluid 96 chloride ion content is not more than 25 PPM

8, after the water pressure test, should the water wave shell, as soon as possible and quickly will wave shell surface dry

9, and the Compensator Corrugated tube contact the camp of the heat preservation material does not contain chlorine.

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5