欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
High temperature axial direction type Compensator

Model:

欧冠热门Metal Compensator series

Temperature:

0℃

Material:

欧冠热门upon your demands

Pressure:

0Mpa

Details:

High temperature axial direction type Compensator can compensate the axial deformation of High temperature pipe, is composed of a set or two sets of Stainless steel Corrugated pipe and carbon steel fittings, because the product need to bear High temperature, axial type Compensator under High temperature parts have fireproof layer on the second floor, can fully meet user on the service life of products under High temperature and product needs.

欧冠热门Product description:

1, the pressure range: 0.1-0.6 Mpa

2, the temperature range: less than or equal to 1300 degrees Celsius

3, size range: 12 - DN4000mm

欧冠热门4, the fatigue life: 2000 times

Install and use requirements:

欧冠热门1, Compensator, before installation should check its Model, specification and pipeline configuration, must comply with the design requirements.

2, with inner Sleeve Compensator should pay attention to increase the inner Sleeve in the direction of the flow in the same direction with the media, hinge type Compensator hinge rotation plane should be consistent with the rotational plane displacement.

3, need to be "cold" tight Compensator, predeformation auxiliary components should be used in pipe installation is removed.

4, it is forbidden to use Corrugated Compensator deformation method to adjust the pipeline installation error, so as not to affect the normal function of the Compensator, reduce and increase the service life of piping, equipment, the load bearing components.

5, the installation process, do not allow the slag splash to the shell surface, do not allow the wave shell by other mechanical damage.

欧冠热门6, piping installation, should be removed as soon as possible Corrugated Compensator is used as the install transport yellow aided positioning components and fasteners, and switch to a specified position limit device according to design requirements, make the piping have ample compensation ability under the environmental conditions.

7, Compensator all active components shall be external components are stuck or limit the scope of its activity, should guarantee the active parts of normal movement.

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5