欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
Curved tube pressure balance type Compensator

Model:

欧冠热门Metal Compensator series

Temperature:

0℃

Material:

upon your demands

Pressure:

0Mpa

Details:

欧冠热门Curved tube pressure balance type Compensator (expansion joint or slip joint) (QYP) at the front side (channel) has two jobs Corrugated tube, the back of the balance (balance) there is a Corrugated tube. When bend pipe production and the horizontal displacement, the Big spherical nut on the rod silk spinning the spherical washer around. At the same time, the Big thrust rod under internal pressure. Two Corrugated tube Compensator channel side can compensate for the transverse shift, bending section balancing the Corrugated tube can be made of the axial displacement of straight pipe.

欧冠热门Curved tube pressure balance type Compensator (QYP) is mainly used to absorb the axial and lateral displacement of the combination and can balance the pressure of the Corrugated pipe thrust. The expansion joint for Corrugated tubular structure, Corrugated pipe and compensation by the pressure balance in Corrugated tubes, through the pressure balance balance Corrugated Corrugated tube Compensator stress, relieve Compensator and pipeline thrust itself. Curved tube pressure balance type Compensator (QYP) fundamentally solves the blind flange force on the fixed bracket of thrust, simplifies the fixed bracket design and construction, reduces the project cost.

欧冠热门Curved tube pressure balance type Compensator (QYP) install and use notice:

1. The Curved tube pressure balance type Corrugated Compensator (inflation) general application in the overhead of straight line, horizontal installation.

欧冠热门2. The Curved tube pressure balance type Corrugated Compensator (inflation) after the installation, all the small pull rod should be removed.

欧冠热门3. To reduce the Corrugated tube expansion joint of bearing reaction forces of elastic, before installation for this kind of Corrugated pipe expansion joint for pretension or preloading can be realized by adjusting its small bar ().

Curved tube pressure balance type Compensator is often used in pumps, compressors, steam turbines and other pipe system is sensitive to load, and can absorb vibration noise, guarantee the safe operation of the equipment. It can compensate the axial displacement, transverse displacement, without pressure within the piping system or other equipment to produce thrust. Can rapid attenuation due to start, stop and so on to cause the system pressure wave, vibration to eliminate water machine, and can absorb vibration noise, guarantee the safe operation of the equipment.

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5