欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
Pour fill type Spherical Compensator

Model:

欧冠热门Metal Compensator series

Temperature:

0℃

Material:

欧冠热门upon your demands

Pressure:

0Mpa

Details:

欧冠热门Pour fill type ball type Compensator applies to straight pipe laying, to address the uneven ground subsidence, earthquakes, vibration and other factors cause high stress deformation and other issues. It mainly consists of ball, coat set, rear, spherical bearings, stuffing chamber and check injection material composition, etc., under normal circumstances is 2-3 form a group to use.

Features:

欧冠热门① to Metal matrix spherical bearings bearing and centering the ball instead of the normal type Compensator to seal the bearing and the centering. Adjustment method Flange gland, thus ensuring a more reliable seal.

欧冠热门② with the overall welded structure, fully inclusive of all moving parts

欧冠热门③ spherical bearing Material high load capacity, self-lubricating film coating on low lubricity coefficient.

④ maximum compensation, is the largest of all Compensator.

欧冠热门⑤ spherical high-quality finish cleaning the exposed parts plus sealed plate to prevent dust and debris from entering the Face ball bearings between the research sphere surface wounds, reduce the service life.

Installation Precautions

欧冠热门① choose double injection stoppage time the ball must be a reasonable choice X, Fy to be controlled within the allowable range, in particular the pre-select folding angle installation, when subjected to the venue or other restrictions can not achieve a reasonable value of X, should adopt a flexible support hanger to reduce Fy or taking the ball up three note program.

欧冠热门Note ② When the ball up horizontally arranged for DN≥300mm products to set the platform with a low friction sliding bearings supported the weight of the ball to avoid the pipe due to the sagging.

Note ③ When the ball up vertically arranged bare sphere down the best, if you press medium flow upward spherical arrangement, the surface of the ball should be protected.

④ early for pre-bending angle of the product, it should be noted bending direction during installation.

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5