欧冠热门

Welcome to Taizhou Hongying Mechanical Equipment Manufacturing Factory official web!
Products
BR0.5 Plate heat exchanger

BR0.5 Technical parameters:
Model                                                     BR0.35
Active Area Per Plate           0.35m2,
Nominal plate gap               3.5mm
ThicknessThi ckne ss                                    0.6mm
Port dim                                 100mm
Max flow rate                                 120M3/H
Connection diameter                  DN100
Working pressure                        0.6MPa, 1.OMPa, 1.6MPa

BR0.5 Device dimension:
 

 

欧冠热门 Type 

Heat transfer Area(m2)  

   Number of plates
欧冠热门 number of plates

E

欧冠热门   F weight (kg)

Flow rate(m3/H)
 

BR0.5-A

30

60

264

1100

942

68

BR0.5-C

90

180

792

1600

1404

253

◆A is minimum assembly area, C for maximum assembling area.
◆Compact size L(mm): L=(4.4±0.2) x  Number of plates
◆Water flow is according to the single process, board asked when the flow velocity of 0.4 m/s
◆Reserve the right to revise the data, the above data are for reference only, the specific in kind prevail

Brief
     Plate heat exchanger is made up of frame, heat transfer Plate group and clamping bolt and other major parts.

    Framework includes a fixed pressure plate and a pressure plate, on the guide rod and the guide rod bearing, a pillar at the other '. Compressed into corrugated plate hanging on the guide bar in between the two panels, mobile activity compaction pressure plate to plate group, with a set of clamping screw will be fixed pressure plate and the activity of compacting powder compact to a certain size. Two kinds of medium by the fixed (or activities) on the pressure plate Flange holes into the composed of corrugated plate of each channel, after the heat exchange medium again by fixed (or activities) on the pressure plate Flange hole. Activities with fixed pressure plate, pressure plate, pillars and guide bar are low carbon steel. Considering the various requirements of the users, framework design has a variety of forms, mainly has double support frame type and common floor, etc., can also according to the requirements of the user changes the framework model.

    Heat transfer Plate is a Plate heat exchanger is one of the core parts. Corrugated plate through a pressure molding, design reasonable ripple increases the effective heat transfer area of plate and make the flow ripple through the turbulence formation, to strengthen the heat transfer process. Assembly ripple and ripple cross into a lot of contact resistance points, greatly improving the plate stiffness, so can bear high pressure. As a heat transfer surface, every board under the action of the seal, both sides of the plate Don't have a cold and hot medium, heat transfer. Plate with four away L of liquid distribution, away L and plate around with sealing gasket, restrict the flow of medium in the plate group, the plate form parallel channels, flows through the inside of the two kinds of medium, make the best effect of heat transfer in the direction of the flow, in order to adapt to a variety of strong corrosion medium, corrugated plate materials are: pure titanium TAl, used in seawater or other corrosive medium; A variety of Stainless steel, with j = fresh water, drinking water, oil and other corrosive medium.

    On corrugated plate seal groove is equipped with sealing gasket, sealing gasket design into double sealing structure, and a signal. When the medium such as from the first line of the seal leak, away from the signal emission equipment, L can be found that the problem be solved as early as possible, will not result in a mixture of two kinds of medium. Sealing gasket can be selected according to different fluid and operating temperature of different analysing.

Plate material:
    * Stainless steel SUS304 SUS316L
      Clean water, river water, food, oil, mineral oil
    * Titanium and Palladium
      Marine Water, salt water, saline content
    * Hadtelloy Alloy
      Concentrated sulfuric acid, hydrochloric acid, phosphoric acid
    * Nickel
      High temperature and high concentration of caustic soda

Gasket material:
    * NBR
      Water, sea water, mineral oil, brine    一15--1IO~C
    *BNBR    -
      Mineral oil at high temperature, high temperature water    15--140~C
    * EPDM
      Hot water, steam, acid, alkali    一25--150~C
    *  Viton/Fluorine Rubber
      Strong acid, strong alkali, mineral oil, grease and oil, etc    一5--180~C
    *NEOPRENE
      Acid, alkali and mineral oil, low molecular weight fatty hydrocarbon   一35--130~C
   * Silicon Rubber
      High temperature, and some corrosive medium    一65-200℃

Design concept:
    *Plate of booster with a new type of diversion area design is a bigger place in plate diversion area velocity using multiplexer channel to increase pressure, to make the velocity equal to the entire plate, greatly improving the plate in the thermal efficiency, reduced the dead Angle, improve the plate scale.
    *Hanging plate high-strength mouth increase pattern design is designed to hang in the mouth, strengthen the rigidity around the flanging, assembled more neat and beautiful, open the better performance.
    *Plate of middle plate groove design of the inside of the foot board piece continuous corrugated disconnect, coexist of plates I} l added half slot structure, ease of plates on the pressure, make the plate more after press forming, whole, little flexible.
    *Plate of interlock design is on board the corners of suppressing special mechanical interlocking structure, to improve the plate assembly easy to string a leak phenomenon, in the process of the plate together more convenient, beautiful.
    *Plate of sealing gaskets are all made from paste buckles form, reduce the operation maintenance cost, easy maintenance.

Technical advantages and characteristic:
    *High coefficient of heat transfer, heat transfer Plate on the circles of special design, can make the fluid flow in low flow velocity under the intense turbulence, turbulence since the net effect and can prevent dirt, make the Plate heat exchanger heat transfer coefficient of tube and shell heat exchanger 3-5 times.
    *Economical: under the premise of the same heat, comparison of shell and tube: less investment, low operating cost, maintenance cost is low.
    *Adjustable: need to increase and decrease plate can meet the needs of process changes.
    *Compact structure, on the premise of the same heat, take up the space is only half of the tube shell type l / 3
    *Wash the maintenance is easy to clean

Design and type-selection:
    (1)Cold and hot medium physical parameters, such as ph, chlorine content, viscosity, density, thermal conductivity, specific heat and so on.
    (2)The import and export of cold and hot medium temperature.
    (3)Cold and hot medium flow or one of the traffic.
    (4)Cold and hot medium pressure loss.
    (5) Plate heat exchanger inherent features, such as Plate material, sealing rubber gasket materials.

 

Address: Xianjin Industrial Park, Louzhuang Town, Jiangyan District, Taizhou City, Jiangsu Province, China   

Tel: 0523-88698649  13921729986

Fax: 0523-88693182     

URL: maoyi24.com

 
宏颖客服
 
 
 
 
河北快3 500万彩票 广西11选5 云南11选5 云南11选5 云南11选5 福建11选5 福建11选5